Removing the Coin-Cell Battery
1.
Follow the instructions in "Before You Begin" on page
2.
Remove the battery pack (see "Removing the Battery Pack" on page
3.
Remove the compartment door (see "Removing the Compartment Door" on
page 14).
4.
Disconnect the coin-cell battery cable from the system board connector.
5.
Lift the coin-cell battery off the computer base.
Replacing the Coin-Cell Battery
1.
Place the coin-cell battery in the slot on the computer base.
2.
Connect the coin-cell battery cable to the system board connector.
3.
Replace the compartment door (see "Replacing the Compartment Door" on
page 14).
4.
Replace the battery pack (see "Replacing the Battery Pack" on page
CAUTION: Before turning on the computer, replace all screws and ensure
that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
6.
11).
11).
1 coin-cell battery cable connector
CHAPTER 6: COIN-CELL BATTERY
2
1
2
coin-cell battery
025
/
025