Replacing The Display Assembly - Dell Alienware M17x - GAMING LATTOP Service Manual

Replacing the Display Assembly

1. Align the screw holes on the display hinges with the computer base.
2. Replace the four screws (two on each hinge) that secure the display
assembly to the computer base.
3. Replace the magnesium cover (see "Replacing the Magnesium Cover" on
page 51).
4. Replace the left and right brackets (see "Replacing the Brackets" on page
5. Replace the palm rest (see "Replacing the Palm Rest" on page
6. Replace the keyboard (see "Replacing the Keyboard" on page
7. Replace the center control cover (see "Replacing the Center Control Cover"
on page 35).
8. Replace the battery pack (see "Replacing the Battery Pack" on page
CAUTION: Before turning on the computer, replace all screws and ensure
that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
47).
44).
39).
11).
CHAPTER 13: DISPLAY
055
/
055