Removing the Speakers
1.
Follow the instructions in "Before You Begin" on page
2.
Remove the system board (see "Removing the System Board" on page
3.
Remove the speaker cables from the routing guides.
4.
Lift the speakers off the computer base.
Replacing the Speakers
1.
Place the speakers on the computer base.
2.
Route the speaker cables into the routing guides.
3.
Replace the system board (see "Replacing the System Board" on page
CAUTION: Before turning on the computer, replace all screws and ensure
that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
6.
90).
92).
1 speakers (2)
CHAPTER 22: SPEAKERS
1
2
2
speaker cables
095
/
095