3.
Replace and tighten the captive screw that secures the memory module
door to the computer base.
4.
Replace the compartment door (see "Replacing the Compartment Door" on
page 14).
5.
Replace the battery pack (see "Replacing the Battery Pack" on page
CAUTION: Before turning on the computer, replace all screws and ensure
that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
6.
Turn on the computer.
As the computer boots, it detects the additional memory and automatically
updates the system configuration information.
To confirm the amount of memory installed in the computer, click Start (Windows
Vista
logo) > Help and Support > Dell System Information.
®
11).
CHAPTER 7: MEMORY MODULE(S)
030
/
030