Replacing the Center Control Cover
1.
Slide the cable into the center control cover connector and pull down the
connector latch to secure the cable to the connector.
2.
Align the center control cover with the computer and snap the cover in
place.
3.
Turn the computer over and replace the two screws that secure the center
control cover to the computer base.
4.
Replace the compartment door (see "Replacing the Compartment Door" on
page 14).
5.
Replace the battery pack (see "Replacing the Battery Pack" on page
CAUTION: Before turning on the computer, replace all screws and ensure
that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
11).
CHAPTER 8: CENTER CONTROL COVER
035
/
035