Configuring The Feature Key - HP 316095-B21 - StorageWorks Edge Switch 2/24 Instructions Manual

Flexport Upgrade Instructions

Configuring the Feature Key

A feature key is an alphanumeric string consisting of both uppercase and lowercase
characters. The following is an example of a feature key format:
XxXx-XXxX-xxXX-xX
The total number of characters may vary. The key is case sensitive and must be entered
exactly, including the dashes.
The following procedure tells you how to configure the feature key using HAFM. If
you are using EWS to configure the feature key, refer to online help in the EWS. If
you are using the CLI to configure the feature key, refer to the hp StorageWorks CLI
reference guide for directors and edge switches.
After you have obtained the feature key, access HAFM for the Switch to be configured
and perform the following steps:
1. Set the Switch offline by choosing Set Online State from the Maintenance
menu.
For help, refer to the most recent version of the hp StorageWorks edge switch 2/24
product manager user guide.
NOTE: Before setting the Switch offline, warn administrators and users currently operating
attached devices that the Switch is going offline and that there will be a disruption of port
operation. Also, request that the devices affected by an interruption of data flow be set offline.
2. At the Hardware View, click Configure at the top of the view and select
Features from the pop-up menu. The Configure Feature Key dialog box displays
(Figure 2).
Figure 2: Configure Feature Key dialog box
4 edge switch 2/24 flexport upgrade instructions