Configuring The Feature Key - HP 316095-B21 - StorageWorks Edge Switch 2/24 Upgrade Instructions

Flexport Upgrade Instructions

Configuring the Feature Key

A feature key is an alphanumeric string consisting of both uppercase and
lowercase characters. The following is an example of a feature key format:
The total number of characters may vary. The key is case sensitive and must be
entered exactly as shown in the previous example, including the dashes.
The following procedure tells you how to configure the feature key using HAFM.
If you are using EWS to configure the feature key, refer to online help in the EWS.
If you are using the CLI to configure the feature key, refer to the HP StorageWorks
CLI Reference Guide for Directors and Edge Switches.
After you have obtained the feature key, access HAFM for the switch to be
configured and perform the steps that follow.
If your firmware version is below 04.01.02, you will need to take the switch
offline before you start. Begin with
above, you do not need to take the switch offline. Begin with
1. Set the switch offline by choosing Set Online State from the Maintenance
Note:
operating attached devices that the switch is going offline and that there will be a
disruption of port operation. Also, request that the devices affected by an interruption of
data flow be set offline.
2. At the Hardware View, click Configure at the top of the view and select
Figure 2: Configure Feature Key dialog box
14
XxXx-XXxX-xxXX-xX
menu.
For help, refer to the most recent version of the HP StorageWorks
Edge Switch 2/24 Product Manager User Guide.
Before setting the switch offline, warn administrators and users currently
Features from the pop-up menu. The Configure Feature Key dialog box
displays (Figure 2).
step 1. If your firmware version is 04.01.02 or
Edge Switch 2/24 Flexport Upgrade Instructions
step 2