HP AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive Installation Manual page 20

Modular smart array
Hide thumbs Also See for AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive:
Table of Contents

Advertisement

Table 3
MSA1500 and SAN-related websites (continued)
Website
QLogic Driver for HBA Control and
Multipathing
http://h18006.www1.hp.com/
products/sanworks/
multipathoptions/index.html
Emulex MultiPulse Path Failover for
Linux
http://h18006.www1.hp.com/products/
sanworks/softwaredrivers/multipathoptions
/linux.html
Array Configuration Utility (ACU)
Array Configuration Utility - Command
Line Interface (ACU-CLI)
h18000.www1.hp.com/products/
servers/proliantstorage/
software-management/acumatrix/
index.html
20
Installation procedures—All deployments
Content
Multipathing tool for Linux (active/passive and active/active environments)
Used in multipathing environments running either active/passive or
active/active firmware, QLogic Driver for HBA Control and Multipathing
provides multipathing support for Linux environments.
This multipathing tool is included with the QLogic HBA driver on the MSA
Support Software CD.
Multipathing tool for Linux (active/active environments only)
Used in multipathing environments running active/active firmware, Emulex
MultiPulse provides multipathing support for Linux environments.
MultiPulse is included with the Emulex Linux HBA driver on the MSA
Support Software CD.
NOTE:
Emulex MultiPulse is supported for use with Linux kernel
2.6 or later only. No support is provided or planned for earlier
Linux kernels.
Storage configuration software (active/passive and active/active
environments)
The Array Configuration Utility (ACU) is a server-based, browser-accessed
tool used to configure an array controller and its storage. The ACU can be
used in Windows, Linux, and NetWare environments. (NetWare
environments run the ACU directly from the MSA Support Software CD.)
The Array Configuration Utility-Command Line Interface (ACU-CLI) is a
command line interface used to configure an array controller and its
storage. The ACU-CLI is primarily used in HP-UX environments.
These utilities are provided on the MSA Support Software CD.

Advertisement

Table of Contents
loading

Table of Contents