HP AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive Installation Manual page 19

Table 3 MSA1500 and SAN-related websites (continued)
Website
HP Storage Management Initiative
Specification provider for the MSA
http://h18007.www1.hp.com/
support/files/storage/us/
download/23385.html
HP Secure Path
http://www.hp.com/go/securepath
HP MPIO Full Featured Failover and
Manager
http://h18006.www1.hp.com/
products/sanworks/
multipathoptions/index.html
HP MPIO Basic Failover
http://h18006.www1.hp.com/
products/sanworks/
multipathoptions/index.html
Content
Provides the Web-based management interface for the management of the
MSA, in compliance with the SMI-S standard.
This MSA-specific SMI-S provider can be installed on Microsoft Windows
2000 or Windows 2003 Server hosts with access to the MSA.
For more information about HP and SMI-S, go to the HP Storage
Management Initiative Specification website:
http://h18006.www1.hp.com/storage/smis.html
For general information about SMI-S clients and providers, go to the
following websites:
• Storage Networking Industry Association (SNIA):
http://www.snia.org/home
• Storage Networking Industry Association (SNIA) listings of HP SMI-S
providers: http://www.snia.org/ctp/smi_conform
Multipathing software for Windows, Linux, NetWare, and HP-UX
(active/passive environments only)
Used in multipathing environments running active/passive array controller
firmware, Secure Path manages, monitors, and maintains data paths
between server and storage. If a path failure is detected, traffic fails over to
an alternative path.
Special Secure Path versions are available for MSA
1500
MSA -only environments. If your SAN environment includes only MSA
controllers running active/passive firmware versions 4.x or 5.x, consider
using a "Workgroup Edition" of Secure Path.
Multipathing software for Windows (active/active environments only)
Used in multipathing environments running active/active array controller
firmware, HP MPIO Full Featured Failover and Manager manages,
monitors, and maintains data paths between server and storage. If a path
failure is detected, traffic fails over to an alternative path.
Other multipath software already present on the host may not be
compatible with HP Full Featured MPIO. See the MSA
guide for details.
The HP full-featured MPIO is provided on the MSA Support Software CD.
Multipathing software for Windows (active/passive environments only)
Used in multipathing environments running active/passive array controller
firmware, HP MPIO Basic Failover provides basic path failover and path
recovery.
Other multipath software already present on the host may not be
compatible with HP Basic MPIO. See the MSA
for details.
HP StorageWorks 1500 Modular Smart Array installation guide
1000
-only and
1500
compatibility
1500
compatibility guide
19