Installation Requirements
e)
Must be handled on an anti-static mat.
(2)
Limitation of side-mounting
Mount the IDD using the 4 screw holes at the both ends on the both sides as shown in Figure 4.4. Do
not use the center hole by itself.
In case of using the center hole, it must be used in combination with 2 holes on both ends.
(Total 6 screws for 6 holes enclosed)
Holes for
mounting screw
3
4-4
6.35 or less
6.35 or less
Figure 4.3
Mounting frame structure
4
1
Use four holes (No.1-4) to mount
Figure 4.4
Limitation of side-mounting
2
Holes for mounting screw
Center holes
C141-E133-02EN