Wsw37 - Brother IntelliFax-4750 Service Manual

Selector
No.
1 Printout of the stored image data
of an unsent document onto the
error report
2 Erasure of the stored image data
of an unsent document at the time
of the subsequent in-memory
message transmission
3
| Not used.
8
Selector 1: Printout of the stored image data of an unsent document onto an error report
l
This selector determines whether or not the 1st-page image data of a document will be printed out
onto the error report if the document image data stored in the temporary memory cannot be
transmitted normally.
l Selector 2: Erasure of the stored image data of an unsent document at the time of the
subsequent in-memory message transmission
If in-memory message transmission fails repeatedly when selector 1 is set to "1," the temporary
memory will be occupied with image data. Setting selector 2 to "1" will automatically erase the
stored 1st-page image data of an unsent document at the time of the subsequent in-memory
message transmission only when recording paper or toner runs out.

WSW37

(Function setting 15)
Function
V - 47
Setting and Specifications
0: No 1:
0: No 1:
Yes
Yes