Loading Single Sheet Paper - Oki microline ML393 User Manual

Loading Single Sheet Paper

(No paper handling options installed)
1. If you have continuous-form paper in the printer, use the paper
park feature to back it out of the printer.
With SELECT LIGHT on, press the TOF/PARK button. The
paper will retract from the front of the printer.
2. Push the paper lever back to the single sheet setting (towards
the back of the printer).
3. Raise the paper support to its upright position.
Paper
FORM FEED button
4. Place a sheet of paper on the support and adjust the guides for
the width of the paper you are using. Start with the reference
mark for the left edge.
Reference mark for left
edge
Paper lever back
Setup 1 – 19