Load The Paper (Standard Configuration) - Oki MICROLINE MX Series Quick Setup Manual

Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
Install The Ribbon And Paper

Load The Paper (Standard Configuration)

When you start this procedure, verify that the printer cover is open,
the platen lever is raised, and the blue tractor doors are open. See
"Printer Component Locations" on page 8.
Figure 20. Aligning the Paper Supply
1. Prepare the paper supply:
Cabinet Model
a. Open the front door of the printer cabinet.
b. Place the paper supply inside the printer, on the floor of the
c. Align the paper supply with the front label on the floor of the
d. Ensure that the paper pulls freely from the box.
e. Feed the paper up through the paper slot.
NOTE: The 2000 line per minute model has a metal paper guide.
28
Label
cabinet.
printer.
Load the paper on top of this guide.