Table of Contents
Advertisement
Removing the air baffle
When working with some options, you must first remove the air baffle to access
certain components or connectors on the system board. The following illustration
shows how to remove the air baffle.
Air-baffle assembly
Complete the following steps to remove the air baffle:
1. Read the safety information beginning on page v and "Installation guidelines" on
2. Turn off the server and peripheral devices and disconnect all power cords and
3. Place your fingers on each side of the air baffle.
4. Press in on the sides and lift the air baffle out of the server.
page 11.
external cables (see "Turning on the server" on page 12); then, remove the
cover (see "Removing the left-side cover" on page 16).
Attention:
For proper cooling and airflow, replace the air baffle before turning
on the server. Operating the server with the air baffle removed might damage
server components.
Chapter 2. Installing options
17
Advertisement
Table of Contents
