Removing The Dimm Fan Baffle - IBM 9228 - IntelliStation Z - Pro User Manual

Removing the DIMM fan baffle

The computer comes with a DIMM fan baffle that directs airflow to the dual inline
memory modules (DIMM). When installing options, you might have to remove the
DIMM fan baffle to access some components.
To remove the DIMM fan baffle, complete the following steps:
1. Read the safety information that begins on page v and "Installation guidelines"
2. Lift the power-supply handle and rotate the power supply out of the chassis.
3. Press and hold the drive-cage release lever; then, rotate the drive cage
4. If any cables are routed through the DIMM fan baffle, remove them before
5. From inside the chassis, grasp the fan baffle; then, slide it toward the rear of the
38
IBM IntelliStation Z Pro Type 9228: User's Guide
on page 29.
completely out of the chassis until the retaining tab on top of the cage locks into
place.
removing the DIMM fan baffle.
chassis and remove it.
DIMM fan baffle