NETGEAR WAG302 - ProSafe Dual Band Wireless Access Point Reference Manual page 94

ProSafe Dual Band Wireless Access Point WAG302 Reference Manual (802.11a/g)
Table A-1. Access Point Default Configuration Settings
Feature
DHCP Client
Time Zone
Time Zone Adjusted for Daylight Saving
Time
SNMP
Spanning Tree Protocol
Secure Telnet
Wireless
Operating Mode
Access Point Name
Wireless Communication
11a Wireless Network Name (SSID)
11 b/g Wireless Network Name (SSID)
Broadcast Network Name SSID
Security
Transmission Speed
Country/Region
80211.a Radio Frequency Channel
80211.g Radio Frequency Channel
VLAN(802.1Q)
Output Power
Wireless Card Access List
WMM Support
SuperG Mode
a. Maximum Wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput will
vary. Network conditions and environmental factors, including volume of network traffic, building
materials and construction, and network overhead, lower actual data throughput rate.
A-2
Description
Disabled
GMT
Disabled
Enabled, but Trap forwarding disabled
Enabled
Enabled
Access Point
netgearxxxxxx where xxxxxx are the last 6 digits of the
wireless access point MAC address.
Enabled
NETGEAR_11a
NETGEAR_11b/g
Enabled
Disabled
Auto
a
United States (in North America; otherwise, varies by
region)
52
11 until the region is selected
Disabled
Full
All wireless stations allowed
Disabled
Disabled
Default Settings and Technical Specifications
v2.0, May 2006