NETGEAR WAG302 - ProSafe Dual Band Wireless Access Point Reference Manual page 23

ProSafe Dual Band Wireless Access Point WAG302 Reference Manual (802.11a/g)
The following table explains the LED indicators:
Table 1-1. Front Panel LED Indicators
Item LED
1 PWR
Off
On
2 TEST
Blink
3 100
Off
On (Green) 100 Mbps Fast Ethernet link detected.
4 LINK/ACT LAN
Off
On (Green) 100 Mbps Fast Ethernet link detected, no activity.
Blink
(Green)
On (Amber) 10 Mbps Ethernet link detected, no activity.
Blink
(Amber)
5 802.11a WLAN
Off
Blink
(Green)
6 802.11g WLAN
Off
Blink
(Green)
Introduction
DESCRIPTION
Power Indicator
No power.
Power is on.
Self Test Indicator
Indicates self test, loading software, or system fault (if continues).
Note: This LED may blink for a minute before going off.
Ethernet LAN Speed Indicator
Indicates 10 Mbps Ethernet link detected
Ethernet LAN Link Activity Indicator
Indicates no Ethernet link detected.
Indicates data traffic on the 100Mbps Ethernet LAN.
Indicates data traffic on the 10Mbps Ethernet LAN.
Wireless LAN Link Activity Indicator (5 GHz)
Indicates no wireless link activity.
Wireless link activity.
Wireless LAN Link Activity Indicator (2.4 GHz)
Indicates no wireless link activity.
Wireless link activity.
v2.0, May 2006
1-7