NETGEAR WAG302 - ProSafe Dual Band Wireless Access Point Reference Manual page 43

Dual band wireless access point (802.11a/g)

Hide thumbs Also See for WAG302 - ProSafe Dual Band Wireless Access Point:

Table of Contents

ProSafe Dual Band Wireless Access Point WAG302 Reference Manual (802.11a/g)

Figure 2-12

An overview of the information that is required to set up a Security Profile follows—including a

description of the Network Authentication choices that are available:

•

Security Profile Name. Use a name that makes it easy to recognize the profile—and to tell

profiles apart. (The default names are Profile1, Profile 2, and so on.) You can enter a value of

up to 32 alphanumeric characters.

Note: Only the first profile is enabled by default. The rest of the profiles are disabled

and must be enabled if configured.

•

Wireless Network Name (SSID). This is the name of your wireless network. It is set to the

default name of NETGEAR_11a for 802.11a and NETGEAR_11g for 802.11b/g.

Basic Installation and Configuration

Selected Security

Profile

v2.0, May 2006

2-19

Table of Contents