NETGEAR WAG302 - ProSafe Dual Band Wireless Access Point Reference Manual page 104

ProSafe Dual Band Wireless Access Point WAG302 Reference Manual (802.11a/g)
TKIP 2-31
TKIP+AES 2-33, 2-35
Data Rate 2-15, 2-16
Daylight Saving Time
adjustment for 2-13
default login 2-4
default password 2-4, 2-11
Default Settings A-1
default settings 2-17
default subnet mask
255.255.255.0 2-4
default user name 2-4, 2-11
DHCP Client 1-2, 2-13
enabling 2-13
DHCP Server
enabling access point 4-1
use as 4-1
DHCP wireless clients
settings of 4-1
DTIM Interval
default setting 4-5
dynamic IP addresses
enabling 2-9
E
emulation program settings
Telnet, use with 3-2
Enable SysLog 3-4
equipment placement
reception range 2-1
Ethernet
Autosensing connection 1-3
LAN 1-8
Layer 3 managed switcfh 1-3
Power over 1-3
RJ-45 port 1-8
F
factory default settings
reset button 1-8, 5-4
resetting 5-4
Index-2
restoring 3-13
features 1-2
firmware, upgrading 1-3
Fragmentation Length
default setting 4-5
front panel
diagram of 1-6
G
Gateway
default address 2-13
general information screen
field descriptions 3-5
General Summary screen 3-5
H
hotspot
setting up server 4-3
settings 1-3
Hotspot settings 4-1
Hotspot Settings screen 4-3
hotspots 2-31, 2-33, 2-34, 2-35, 2-36
WIreless Client Security Separation 2-29
http
//192.168.0.230 2-10
HTTP redirect, enabling 4-1
I
interference sources 2-2
IP Address
default 2-10
IP address
default 2-10, 2-13, 2-17
IP Address, settings 2-7
IP Settings
DHCP clients 4-1
DHCP server, use of 4-1
Static IP clients 4-1
IP Subnet mask
default 2-13
v2.0, May 2006