NETGEAR WAG302 - ProSafe Dual Band Wireless Access Point Reference Manual page 66

Dual band wireless access point (802.11a/g)

Hide thumbs Also See for WAG302 - ProSafe Dual Band Wireless Access Point:

Table of Contents

ProSafe Dual Band Wireless Access Point WAG302 Reference Manual (802.11a/g)

Figure 3-3

2. Enable SysLog – Enable this option if you have a SysLog server on your LAN. If enabled,

you must enter the IP address of your SysLog server and the port number your SysLog server

is configured to use.

a. SysLog Server IP address –The access point will send all the SysLog to the specified IP

address if SysLog option is enabled. Default: 0.0.0.0

b. Port – The port number configured in the SysLog server on your LAN. Default: 514

3. Click Apply to save your Syslog settings.

The Activity Log Window displays the Access Point system activity.

Click Refresh to update the display or click Save As to save the log contents into a file on your PC

or to save the file to a disk drive.

3-4

v2.0, May 2006

Management

Table of Contents