NETGEAR WAG302 - ProSafe Dual Band Wireless Access Point Reference Manual page 49

Dual band wireless access point (802.11a/g)

Hide thumbs Also See for WAG302 - ProSafe Dual Band Wireless Access Point:

Table of Contents

ProSafe Dual Band Wireless Access Point WAG302 Reference Manual (802.11a/g)

•

Update if any station disassociates: Check this radio box to refresh the global key when

any stations disassociate from the wireless access point.

Figure 2-13

•

Accounting Server Configuration. This configuration is required for accounting using a

RADIUS Server. The IP Address, Port Number and Shared Secret are required for

communication with the RADIUS Server. You can configure a Secondary RADIUS

Server to use if the Primary RADIUS Server fails.

–

IP Address. The IP address of the RADIUS Server. The default is 0.0.0.0

–

Port Number. Port number of the RADIUS Server. The default: 1813

–

Shared Secret. This is shared between the Wireless Access Point and the RADIUS

Server while authenticating the supplicant (wireless client).

Basic Installation and Configuration

v2.0, May 2006

2-25

Table of Contents