NETGEAR WAG302 - ProSafe Dual Band Wireless Access Point Reference Manual page 53

ProSafe Dual Band Wireless Access Point WAG302 Reference Manual (802.11a/g)
3. You manually or automatically program the four data encryption keys. These values must be
identical on all PCS and wireless access points in your network. Choose either:
• Automatic – Enter a word or group of printable characters in the Passphrase box and click
the Generate button. The four key boxes will be automatically populated with key values.
• Manual – Enter the number of hexadecimal digits appropriate to the encryption strength:
10 digits for 64-bit and 26 digits for 128-bit (any combination of 0-9, a-f, or A-F)
Select which of the four keys will be the default.
Figure 2-16
4. Select the key to be used as the default key by checking the radio box. (Data transmissions are
always encrypted using the default key.)
See the document "Wireless Communications" for a full explanation of each of these options,
as defined by the IEEE 802.11 wireless communication standard. A link to this document on
the NETGEAR website is in
5. Wireless Client Security Separation is disabled by default. If enabled, associated wireless
clients will not be able to communicate with each other. (This feature is intended for hotspots
and other public access situations.
6. Click Apply to save your settings.
Basic Installation and Configuration
Appendix B, "Related
v2.0, May 2006
Documents."
2-29