NETGEAR WAG302 - ProSafe Dual Band Wireless Access Point Reference Manual page 82

ProSafe Dual Band Wireless Access Point WAG302 Reference Manual (802.11a/g)
• Repeater. If selected, this wireless access point will operate as a Repeater only, and send all
traffic to the remote access point. If selected, you must enter the MAC address (physical
address) of the remote access point.
The screens used to configure these options are located by selecting Advanced Access Point
Settings 11a or Advanced Access Point Settings 11b/g under Advanced on the main menu (see
Figure 4-4 below.
Figure 4-4
The screens used to configure these wireless access point modes are shown in
and described in the following sections.
4-6
v2.0, May 2006
Figure 4-4 above,
Advanced Configuration