ProSafe Dual Band Wireless Access Point WAG302 Reference Manual (802.11a/g)
.
Figure 4-1
3. Configure the following TCP/IP configurations for using theWAG302 as a DHCP Server for
wireless clients.
•
Starting IP Address: Enter the starting IP address that can be assigned from the DHCP
server on this Access Point.
•
Ending IP Address: Enter the Ending IP address that can be assigned from the DHCP
server on this Access Point
•
Subnet Mask: The Access Point will assign the specified subnet mask to the connected
wireless stations.
•
Gateway Address: The Access Point will assign this IP address as the default gateway for
any traffic beyond the local network.
•
Primary DNS Server: The Access Point will assign this IP address as the primary
Domain Name Server used by the connected wireless stations.
•
Secondary DNS Server: The Access Point will assign this IP address as the secondary
Domain Name Server used by the connected wireless stations.
•
Primary WINS Server: The Access Point will assign this IP address as the primary
WINS Server used by the connected wireless stations.
4-2
v2.0, May 2006
Advanced Configuration