Manually Select Radio Channels - 3Com 3CRWE675075 - 11a/b/g Wireless LAN Workgroup Bridge User Manual

Manually Select
Radio Channels
Downloaded from www.Manualslib.com
Table 11 Wireless Network Page (continued)
Antenna Selection
Data Preamble
On the Advanced Wireless Network page, you can manually select the
radio channels and radio modes. The Bridge only looks for a best SSID
that matches the specified radio mode on the specified channels.
manuals search engine
Using the Configuration Management System
Select an antenna for the radio signal:
Internal — this default setting should be used in most
■
circumstances.
External and one internal antenna — this setting
■
automatically determines which antenna is best for sending
packets to individually attached clients. Choose this setting
if the Bridge is located in a place that is surrounded or
hindered by metal paths or walls.
To increase performance, click Short (Enhanced performance).
When equipment that does not support short preamble is also
being used, click Long (Wi-Fi Interoperable).
Note: The Data Preamble option is available in ad-hoc mode
only. However, the Short Data Preamble option is not available
for 802.11a and 802.11a Turbo modes in ad-hoc mode.
33