Installing The Bridge; Unpacking The Bridge - 3Com 3CRWE675075 - 11a/b/g Wireless LAN Workgroup Bridge User Manual
11a/b/g wireless workgroup bridge
Hide thumbs
Also See for 3CRWE675075 - 11a/b/g Wireless LAN Workgroup Bridge:
- User manual (70 pages) ,
- Quick start manual (9 pages)
Table of Contents
Advertisement
2
Unpacking the
Bridge
Downloaded from
www.Manualslib.com
I
NSTALLING THE
This chapter contains the information you need to install and set up the
Bridge. It covers the following topics:
Unpacking the Bridge
■
Observing Safety Precautions
■
Deciding Where to Place the Bridge
■
Connecting the Bridge
■
Checking the LED Indicators
■
Attaching An External Antenna
■
Determining if you Need to Configure the Bridge
■
Using the 3Com Installation CD
■
Make sure that you have the following items, which are included with the
Bridge:
Power adapter and power cord.
■
Standard Category 5 unshielded twisted pair (UTP) Ethernet cable.
■
Locking bar (used for securing a wall-mounted installation).
■
Rubber feet (four; used for a flat-surface installation).
■
3Com Installation CD.
■
For wall-mounting installations, you need the following items, which
are not included with the Bridge:
Mounting screws.
■
Plastic anchors (for drywall mounting).
■
To secure the Bridge using the locking bar, you need a lock (not
supplied).
manuals search engine
B
RIDGE
Advertisement
Table of Contents
Need help?
Do you have a question about the 3CRWE675075 - 11a/b/g Wireless LAN Workgroup Bridge and is the answer not in the manual?