Deciding Where To Place The Bridge; Wall-Mounting The Bridge - 3Com 3CRWE675075 - 11a/b/g Wireless LAN Workgroup Bridge User Manual

Deciding Where to
Place the Bridge
Wall-Mounting the
Downloaded from www.Manualslib.com
Place the Bridge in a dry, clean location near the hub, computer, or
printer that will be connected to the Bridge. The location must have a
power source and be within the following distance of a Wi-Fi compliant
wireless LAN access point or ad-hoc wireless station:
For 802.11a compatibility, place the Bridge within 50 m (164 ft) of a
■
Wi-Fi compliant wireless LAN access point.
For 802.11b/g compatibility, place the Bridge within 100 m (328 ft) of
■
a Wi-Fi compliant wireless LAN access point.
The location should be away from transformers, heavy-duty motors,
fluorescent lights, microwave ovens, refrigerators, or other equipment
that could cause radio signal interference.
The Bridge comes with a cradle for mounting on a wall. For additional
Bridge security, the Bridge also comes with a locking bar, which can be used
with a security lock (not provided) to lock the Bridge to the cradle after
the Bridge is mounted to a wall.
To wall-mount the bridge:
1 Screw the cradle to a wall,
Figure 4 Wall-Mounting the Bridge
C radle
manuals search engine

Deciding Where to Place the Bridge

Figure 4
as shown in .
11