Oki MC360 MFP User Manual page 53

Table 7: Menu Function
LEVEL 2
System
Setup
(continued)
Network
Setup
Printer
Setup
ITEM
Report Full Print
Panel Contrast
(for Operator's panel)
TCP/IP
IP Address Set
IP Address
Subnet Mask
Gateway Address
DNS Server Primary
DNS Server Second.
Web
SNMP
Hub Link Setting
Factory Defaults
Copies
Media Check
Mono-Print Speed
X Dimension
Y Dimension
MC360 MFP User's Guide
Menu Structure > 53
DESCRIPTION/OPTION
On/Off
–10 / 0 / +10
Enable/Disable TCP/IP protocol
Auto/Manual
Set the IP Address
Set the Subnet Mask
Set the Gateway Address
Set the Primary Server Address
Set the Secondary Server Address
Enable (Web/IPP is available)
Disable (Web/IPP is not available)
Enable (SNMP is available)
Disable (SNMP is not available)
Auto Negotiate (HUB connection
method is automatically selected;
for all others only the selected
method is used)
100 Base - TX Full
100 Base - TX Half
10 Base - T Full
10 Base - T Half
Execute (resets all network settings
to factory defaults)
1 - 999
Enable (printer checks the paper
size of the print data and that of
the tray; only standard sizes are
checked) / Disable
Auto (mono printing starts in 20
ppm; if color print data received,
it changes to 16 ppm)/Color
speed (always prints 16 ppm)
Normal Speed (always prints
20 ppm)
8.5 in/216 millimeters
11.0 in/279 millimeters