Oki MC360 MFP User Manual page 13

Operator panel.jpg
6. RIGHT Key
7. LCD display
8. START Key
(a = color; b=
monochrome)
9. STOP Key
When in switching Mode:
Used to confirm the Mode selected.
Used to start Push Scan (If Push Scan is selected, the
Executing Push Scan screen appears).
When Setting up:
Decrements the value of the tree structure.
Increments the value of the tree structure as the set value is
confirmed.
128 x 64 dot.
When entering PIN ID, used to confirm the PIN ID entered.
Executes the function selected.
Executes Copy.
Executes Scan to E-mail/ USB Memory/ Server.
Executes Fax Send.
Executes Fax Manual Receive.
Recovery from Error/Warning states.
When pressed from the Screen Entry screen, confirms the
characters or functions selected.
Stops the function being executed.
Stops Copy.
Stops Scan to E-mail/ Memory/ Server.
Stops Fax Send.
Cancels Print Job.
Recover from Error/Warning states:
Used to confirm error messages (when an error that does not
need recovery operation has occurred).
Recovering from Error/Warning states.
Forces a return to the Mode Selection screen from each Stand-
by screen (all settings shown on the Stand-by screen return to
User Default values).
MC360 MFP User's Guide
Introduction > 13