Logout Operation; Operation Time-Out - Oki MC360 MFP User Manual

User PIN ID
This is PIN ID for general users.
If a PIN ID is registered as a general user, the function
selection screen is displayed, also after PIN ID entry the
function selection screen is displayed.
Invalid PIN ID
If the PIN number entered is invalid, Incorrect Password is
displayed for 3 seconds and the display reverts to the Enter PIN
ID screen.
L
OGOUT OPERATION
If Logout is selected or an Operation Time-out occurs, the display
reverts to the Enter PIN ID screen.
Logout by user
With Access Control enabled, Logout options are displayed in the
Menu on the Mode Selection screen.
When the cursor is moved to Logout and the Enter key is pressed,
the display reverts to the Confirm Logout screen.
If Yes is selected with the Enter key on the Confirm Logout
screen, the display reverts to the Enter PIN ID screen.
O T
PERATION IME
> When the MFP operation panel is left inactive for a
prescribed length of time (Operation Time-out), the
display automatically reverts to the Idle screen if Access
Control is disabled.
> If an error state occurs, Operation Time-out is disabled.
> After Operation Time-out, the display automatically
reverts to the Enter PIN ID screen if Access Control is
enabled.
> The length of the Operation Time-out depends on the
setting in Menu Mode>Admin Setup >System Setup >
Return to Stand-by Time.
-
OUT
MC360 MFP User's Guide
Configuring your machine > 38