Windows 95; Host Adapter; Backup Applications - Tandberg Data SLRTAPEDRIVE Installation And User Manual

Tandberg SLR Installation and User's Guide

Windows 95

Host Adapter

Windows 95 includes a driver for most SCSI host adapters. Since
most host adapters support
SCSI interface will be automatically detected after its
installation and the necessary driver(s) copied to the hard disk.
If the host adapter is not automatically detected, please refer to the
installation guide provided with the SCSI host adapter.
Windows 95 Embedded Backup Applet
Windows 95 embedded backup Applet does not contain any
drivers that support SCSI tape drives.

Backup Applications

Since the Windows 95 embedded backup applet does not
include any tape driver that supports SCSI Tape drives, a third
party application is needed to use any of the SLR tape drives.
(For example Veritas Backup Exec for Windows 95/98)
The tape driver is provided by the backup application. For this
reason, after installing your SLR tape drive, it will appear as
"unknown device" by the Windows 95 Device Manager. Please
ignore this information and proceed with the backup software
installation.
functionality, the
Plug-And-Play
Tandberg Data
51