Tape Driver Installation - Tandberg Data SLRTAPEDRIVE Installation And User Manual

Tandberg SLR Installation and User's Guide
Veritas Backup Exec Small Business Server
Suite
Veritas Backup Exec Small Business Server Suite for Win-
dows NT is a complete data protection solution designed
specifically for Microsoft Small Business Server for Windows
NT. Through transparent integration into the administration
console, Backup Exec provides an easy-to-use application
supporting virus protection, backup, restore, and disaster
recovery.

Tape Driver Installation

Before running the application, make sure the tape driver for
your SLR tape drive is properly installed.
1) Select "Control Panel" from the "Settings" menu.
2) Double click on the "Tape Devices" icon. Choose the
"Drivers" tab.
3) Make a note of the type of drivers currently installed. For
each of the tape drivers you want to update,
sequentially select each driver and click "Remove" to
remove the driver from list. If you are initially adding new
drivers, please skip this step.
4) Select "Add..." from the "Drivers" tab.
5) Select the "Have Disk..." button.
6) Enter the drive/path to the directory where the desired
"oemsetup.inf" file is stored on disk. (<CDROM
Letter>:\ WINNT\Drivers\I386
7) Select "OK" in the "Install From Disk" window.
8) Select one of the options in the "Choose the driver you want to
install, and then click OK." list in the "Install Driver" window;
i.e., select the description of the set of tape drives that you
want load a device driver for.
9) Select "OK" in the "Install Driver" window.
10) If the option appears, then select "New" in the
"Windows NT Setup" dialog; then enter the same
drive/path that was entered in step #6 above.
IMPORTANT!
Always select "New" if it appears -- do NOT select "Current"
Tandberg Data
37