Front Panel Led Indicators - Tandberg Data SLRTAPEDRIVE Installation And User Manual

Tandberg Data
26

Front Panel LED Indicators

Tandberg SLR2 ® SLR5
There is one LED (Light Emitting Diode) for the Tandberg
SLR2, SLR3, SLR4, SLR4-DC and SLR5 indicating the following
tape drive status:
LED State
OFF
Steady GREEN
Blinking GREEN
Steady AMBER
Steady GREEN
Steady AMBER
Steady RED
* Contact Tandberg Data Customer Services
Tandberg SLR24, SLR7, SLR40, SLR50, SLR60,
SLR75, SLR100 and SLR140
There are three LEDs for the Tandberg SLR24, SLR7, SLR40,
SLR50, SLR60, SLR75, SLR100 and SLR140 indicating the
following tape drive status:
LED State
Green
Blinking OFF
OFF OFF
OFF OFF
ON OFF
ON Blinking
ON OFF
ON Blinking
OFF OFF
Blinking Blinking
* Contact Tandberg Data Customer Services
Meaning
No activity / no cartridge loaded
No activity / cartridge loaded
Tape drive activity
Media or hardware error
Cleaning cartridge exhausted - cleaning cartridge
must be changed (SLR2--> SLR4)
Cleaning cartridge exhausted - cleaning cartridge
must be changed (SLR5)
Fatal error *
Meaning
Amber
OFF Power up self test/Diagnostic Activity
OFF No activity / no cartridge loaded
ON Cartridge not loaded/Cleaning required
OFF No activity / cartridge loaded
OFF Tape drive activity
ON Tape Loaded/Cleaning required
ON Tape Activity/Cleaning required
Blinking Unrecoverable Drive Failure*
Blinking Fatal Error *
Tandberg SLR Installation and User's Guide