Operating Shock And Vibration Specifications; Operating Shock Specifications; Operating Vibration Specifications; Table 12 Half Sine Wave Pulse Shock Operating Vibration Specifications - Tandberg Data DLT-V4 Product Specification

Operating Shock and Vibration Specifications

Operating Shock
Specifications
Table 12 Half Sine Wave
Pulse Shock Operating
Vibration Specifications
Operating Vibration
Specifications
Table 13 Random Overstress
Operating Vibration
Specifications
DLT-V4 Product Specification
Table 12 lists the shock specifications for the tape drive while it is
operating.
6
Specification
Pulse Shape
Peak
Acceleration
Duration
Application
Table 13, table 14, and
drive while it is operating.
6
Factor
Frequency
Range
Acceleration
Level
Application
Chapter 6 Shock and Vibration Specifications
Operating Shock and Vibration Specifications
5 G Shock 8 G Shock
½ Sine Pulse ½ Sine Pulse
5 G 8 G
11 millisecond 10 ms
(ms)
X, Y, and Z X, Y, and Z
axis, 10 pulses axis, 1 pulse
±
per axis ( ), 60 per axis ( ), 6
total, 1 pulse total
every 6
seconds
table 15 list the vibration specifications for the tape
Criteria Comments
5 to 800 Hz
0.5 G
rms
X, Y, and Z axis Top to bottom, 10 minutes per
axis (min.)
62 G Shock
½ Sine Pulse
62 G
2 ms
X, Y, and Z
axis, 1 pulse
± ±
per axis ( ), 6
total
6
19