Tandberg Data DLT-V4 Product Specification page 20

DLT-V4 Product Specification
Specification
Sustained Transfer
Rate, Compressed
a
Mode
Transfer Rate, Burst
Error Rate
(Unrecoverable)
a. Compressed values use a nominal 2:1 compression ratio.
Actual compression ratios achieved depend on the
redundancy of data files being recorded.
b. Performance may vary when the tape drive reads data
previously written to the DLT VS80 and DLT1 formatted data
cartridges. Performance depends on the quality of the data
cartridge you are reading, not the DLT-V4 tape drive.
Chapter 2 Functional Specifications
Value
Up to 20 MB / sec
160 MB / sec
17
1 in 10 bits (non-media error)
8