Installation Instructions - Kenmore 9787 - Elite HE3 7.0 cu. Ft. Gas Dryer Installation Instructions Manual

27" (69 cm) gas laundry center
Hide thumbs Also See for 9787 - Elite HE3 7.0 cu. Ft. Gas Dryer:
Table of Contents

Advertisement

Available languages

Available languages

IMPORTANT SAFETY INSTRUCTIONS
When discarding or storing your old clothes dryer, remove the door=
SAVE THESE INSTRUCTIONS
WARNING:
For your safety,
the information
in this manual
must be followed
to minimize
the risk of fire or explosion,
or to prevent
property
damage,
personal
injury,
or death.
- Do not store or use gasoline or other flammable
vapors and liquids in the vicinity
of this
or any other appliance.
- WHAT TO DO IF YOU SMELL GAS:
• Do not try to light any appliance.
• Do not touch any electrical
switch; do not use any phone in your building.
• Clear the room, building,
or area of all occupants.
• Immediately
call your gas supplier
from a neighbor's
phone. Follow the gas supplier's
instructions.
• If you cannot
reach your gas supplier,
call the fire department.
- Installation
and service
must be performed
by a qualified
installer,
service agency,
or
the gas supplier.
In the State of Massachusetts,
the following installation instructions apply:
Installations and repairs must be performed by a qualified or licensed contractor, plumber, or gasfitter qualified or licensed by
the State of Massachusetts.
If using a ball valve, it shall be a T-handle type.
A flexible gas connector, when used, must not exceed 3 feet.

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 9787 - Elite HE3 7.0 cu. Ft. Gas Dryer and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

9787 he3 7.0

Table of Contents