H323] Command - WELLTECH LAN PHONE 101 H.323 - VERSION 114 & 504 Manual

LAN Phone 101 User Manual Guide

13. [h323] command

1. –print: display H.323 stack information and configuration.
2. –mode: configure LAN Phone 101 as GateKeeper or Peer-to-Peer Mode.
Usage:h323 –mode 0/1(0 for GateKeeper mode ,1 for Peer-to-Peer mode)
3. –gk: set Main GateKeeper IP address(h323 –gk "xxx.xxx.xxx.xxx") or URL
address( Domain Name Server must be configured. Please refer to 6. [ifaddr] command) .
User can set IP as 255.255.255.255 and let LAN Phone auto discovery for GateKeeper.
Please notice in this case, user must enable gatekeeper discovery function.Please refer to
5.-gkname and 10.-gkdis.
4. –dfgw:to set IP address of default gateway, this function is the same as Microsoft
NetMeeting.
A. To implement this feature both calling and called endpoints must be under
peer-to-peer mode.
B. If the called party is FXO products, such as WellGate 38xx, which Have to
set sysconf –2nddial 0 to make one-stage dialing.


C.If called party is FXS products such as WellGate 35xx : user can dial

5. –algk:set IP address or URL address( Domain Name Server must be configured. Please
refer to 6. [ifaddr] command) of alternative GateKeeper. If LAN Phone tries to register to
main GateKeeper for 10 times but still fail, LAN Phone will try to register to alternative
GateKeeper.
6. –gkname:set GateKeeper name for GateKeeper discovery. When LAN Phone send out
GateKeeper discovery message will search GateKeeper with this GateKeeper name.(please
refer to 10.-gkdis)
7. –e164: identify one number for the LAN Phone 101 to register to the GateKeeper
(h323 –e164 "X").
8. –e164-x:user can assign other 10 telephone numbers .For example, 10 users share the same
LAN Phone, they can assign phone numbers as 100, 200, 300....(h323 –e164 100 –e164-1
Copyright (c) 2003 WellTech Computer Corporation
Dial remote PSTN number under default gateway, LAN Phone will
automatically dial to default gateway, then default gateway will dial
this number to PSTN side.
For example, user wants to dial to ext.888 under WellGate 38xx,
user only have to dial 888 from LAN Phone.
line number of WellGate 35xx from LAN Phone.
For example ,user wants to dial to WellGate 3502，the configuration of
3502 is h323 –line1 101 –line2 102，user can press 101 or 102 dialing to
line1 or line2 of WellGate 3502.
28
LAN Phone Ver. 114/504(Normal and PPPoE)
Document Ver. 1.8b