Quit] Command; Reboot] Command; Flash] Command - WELLTECH LAN PHONE 101 H.323 - VERSION 114 & 504 Manual

LAN Phone 101 User Manual Guide

2. [quit] command

Type quit/exit/close will logout LAN Phone 101 and Telnet Program.

3. [reboot] command

After typing commit command, type reboot to restart the LAN Phone 101.
Sometimes after user type reboot, on terminal screen will display :"Data modified, commit to
flash rom?", which means LAN Phone will record call history or not.(ex. REDIAL , outgoing
and incoming call data)

4. [flash] command

This command will clean the configuration stored in the flash rom to default value and reboot
the LAN Phone 101.
Note: After user upgrade new software version, suggested to execute this command to make
sure new software work well on LAN Phone 101.
Note: To execute the command flash –clean, all configuration of LAN Phone 101
stored on flash rom will be cleaned. It is authorized for the user whose login name
is "root" only.
Copyright (c) 2003 WellTech Computer Corporation
21
LAN Phone Ver. 114/504(Normal and PPPoE)
Document Ver. 1.8b