Passwd] Command - WELLTECH LAN PHONE 101 H.323 - VERSION 114 & 504 Manual

LAN Phone 101 User Manual Guide Document Ver. 1.8b

20.[passwd] command

For security protection, user has to input the password before entering application user/config
mode. Two configurations of login name/password are supported by the system.
1. –set: set password of "root" users or "administrator" users. (password –set
root/administrator "password")
2.–clean: clean up password restored before, and user can login :"root/adminstrator",
password:"press enter".
User who requests authorization to execute all configuration commands needs to login with
"root". If a user login with "administrator", two commands are not functional:
1. password –set root: set password of login : "root".
2. passwd –clean: clean up password restored before, and user can login :"root/adminstrator",
password: "press enter".
3. flash –clean: only "root" users can clean all configurations stored in flash.
4. rom –boot :only "root" users can upgrade LAN Phone boot rom version.
5. rom –boot2m : only "root" users can upgrade LAN Phone 2mb firmware.
36
Copyright (c) 2003 WellTech Computer Corporation LAN Phone Ver. 114/504(Normal and PPPoE)