H323] Command - WELLTECH LAN PHONE 101 H.323 - VERSION 111A & 501A Manual

LAN Phone 101 User Manual Guide

11. [h323] command

1. –print: display H.323 stack information and configuration.
2. –mode: configure LAN Phone 101 as GateKeeper or Peer-to-Peer Mode.
Usage:h323 –mode 0/1(0 for GateKeeper mode ,1 for Peer-to-Peer mode)
3. –gk: set Main GateKeeper IP address(h323 –gk "xxx.xxx.xxx.xxx")
4. –algk:set IP address alternative GateKeeper. If LAN Phone tries to register to main
GateKeeper for 10 times but still fail, LAN Phone will try to register to alternative
GateKeeper.
5. –e164: identify one number for the LAN Phone 101 to register to the GateKeeper
(h323 –e164 "X").
6. –e164-x:user can assign other 10 telephone numbers .For example, 10 users share the same
LAN Phone, they can assign phone numbers as 100, 200, 300....(h323 –e164 100 –e164-1
200 –e164-2 300....) User can disable one number and the number after this one. Ex. from
set 1-5 is configured, if user set the third number as "x", from third to fifth number will be
disabled at the mean time. (ex. h323 –e164-2 x)
7. –alias: identify ID for the LAN Phone 101 to register to the GateKeeper(h323 –alias
"X")..
8. –tokenpwd: To set RRQ/ARQ authentication token password.(h323 –tokenpwd
Copyright (c) 2002 WellTech Computer Corporation
25
Document Ver. 1.6
LAN Phone Ver 111a/501a