Table of Contents
Advertisement
LAN Phone 101 User Manual Guide
server. After installing TFTP program on one PC and connecting to network, LAN Phone 101 is
ready to be upgraded.
1. LCD Panel Control
2. Remote Control: Telnet
＊Download Procedure
1.LCD Panel Control
1.Choose the 1→3 selection-Firmware Upgrade. Press OK to enter into the sub-selection
as below.
2.Download method
There are two methods to download new rom file, please move the "~" symbol by
press or on the keypad to select TFTP or FTP method, then press OK to
confirm it.
3.Set File Server IP
User has to offer one TFTP/FTP server IP Address and set this IP Address on the
LAN Phone keypad. The IP address is necessary for upgrading Lan Phone new
application rom file.
4.Set FTP user account
User has to press user name and password for FTP server login .It is necessary for
upgrading Lan Phone new application rom file in FTP method.
5.Indicate file name
User has to press the file name of new application rom file prepared for upgrading
6.Start Download
Press OK to start download new application rom file .
7.Firmware Version
Show versions of all rom files.
Note: Download via LCD command can only upgrade new application rom
file.
2.Remote Control: Telnet
Associated with the Chapter 3.17 [rom] command:
1. -print: show versions of all rom files.
2. -app,-boot, -dsptest, -dspcore, -dspapp, -rbpcm and -htpcm: upgrade main boot code,
main application code, DSP testing code, DSP kernel code, DSP application code, Ring
Copyright (c) 2002 WellTech Computer Corporation
35
Document Ver. 1.6
LAN Phone Ver 111a/501a
Advertisement
Table of Contents
