LAN Phone 101 User Manual Guide
root/administrator "password")
2.–clean: clean up password restored before, and user can login :"root/adminstrator",
password:"press enter".
User who requests authorization to execute all configuration commands needs to login with
"root". If a user login with "administrator", two commands are not functional:
1. password –set root: set password of login : "root".
2. passwd –clean: clean up password restored before, and user can login :"root/adminstrator",
password:"press enter".
3. flash –clean:only "root" users can clean all configurations stored in flash.
4. rom –boot :only "root" users can upgrade LAN Phone boot rom version.
5. rom –boot2m : only "root" users can upgrade LAN Phone 2mb firmware.
Furthermore, there is permanent login and password for LAN Phone 101: login:"mac",
password:"Mac address of Lan Phone(Please refer to label at the back of LAN Phone 101)"
Chapter 4 Upgrade the LAN Phone 101
LAN Phone 101 supports two methods to upgrade the new version released from Welltech
Computer Co. Both methods are necessary to prepare the TFTP program on the host PC as TFTP
Copyright (c) 2002 WellTech Computer Corporation
34
Document Ver. 1.6
LAN Phone Ver 111a/501a