Quit] Command; Reboot] Command; Flash] Command - WELLTECH LAN PHONE 101 H.323 - VERSION 111A & 501A Manual

LAN Phone 101 User Manual Guide

2. [quit] command

Type quit/exit/close will logout LAN Phone 101 and Program –Telnet.

3. [reboot] command

After doing commit command, type reboot to restart the LAN Phone 101.

4. [flash] command

This command will clean the configuration stored in the flash rom to default value and reboot
the LAN Phone 101.
Note: After user upgrade new software version , suggested to execute this command to make
sure new software work well on LAN Phone 101.
Note: To execute the command flash –clean, all configuration of LAN Phone 101
stored on flash rom will be cleaned. It is authorized for the user whose login name
is "root" only.
Copyright (c) 2002 WellTech Computer Corporation
20
Document Ver. 1.6
LAN Phone Ver 111a/501a