Expanded System; Register A New Handset - Doro NEOBIO 10 User Manual

Expanded system (Two or more handsets e.g +1...)
�he call number for internal calls will be shown in the display in standby mode. �he base unit should be
positioned centrally so that the coverage area is roughly equal for all handsets.
Intercom / internal call
Press (right menu button).
1.
If using more than 2 handsets: Enter call number
2.
A tone will be heard if an external call comes in while an internal call is in progress. End the internal call
with and then answer the external call with
L
Transferring calls/Conference between handsets
When an external call is connected;
Press . Scroll to
1.
If using more than 2 handsets: Enter call number
2.
�o transfer: press
3.
�or conference: hold

Register a new handset

All handsets included in the package are already registered to the base unit. Only for separate handsets/
service measures. You can register up to 6 handsets to one base unit.
This model is GAP (Generic Access Profile) compatible, which means that the handset and the base unit can
both be used with most other GAP compatible units irrespective of manufacturer. However the GAP protocol
cannot guarantee that all functions may be accessed. Extra handsets will not be available as accessories.
Hold down (base unit) until indicator flashes.
1.
J
Press . Scroll to
2.
Enter the base unit's PIN code (e.g. 0000). Press
3.
If the registration is successful the unit will return to standby mode within one minute.
4.
. Press
INTERCOM OK
,
L
pressed down.
*
. Press
REGISTRATION
English
- for the desired handset or press
1 6
.
q
.
- for the desired handset or press
1 6
.
OK
.
OK

for all.
9
for all.
9