System Settings - Doro NEOBIO 10 User Manual

Functions
Press . Scroll to
1.
Scroll to desired function e.g.
2.
Scroll to desired setting. Press
3.
When the alarm is activated
ALARM
off, a signal will be heard for 45 seconds. �he signal can be turned off with any button. If
SNOOZE
off permanently via the menu or by holding
determined by the set ringer level.
�he handset's ringer signal.
RING SETUP
Melodies 2,3,4... can continue for up to 8 seconds if the call is answered in another phone.
Any of the following warning tones can be disbled, Keytone, low battery and range.
TONE SETUP
�he language of the display texts.
LANGUAGE
�he text shown in standby mode.
RENAME HS
Show name or time in standby mode.
HS DISPLAY
�he call is answered when the handset is lifted from the base.
AUTO ANSWER
Setting the date/time. �he format of date/time can also be adjusted.
DATE & TIME

System settings

System PIN is 0000 on delivery.
Press . Scroll to
1.
Scroll to desired function. Press
2.
Enter the desired setting. Press
3.
�he base unit's ringer signal can be
BS RINGER/
adjusted. Only applies to NeoBio 15r/25r.
RING VOLUME
Warning: �o de-register a handset: WARNING, A deregistered handset can not be used with
DELETE HS
the system.
�ONE/PULSE, should normally be set to
DIAL MODE
RECALL �IME.
FLASH TIME
LONG
MEDIUM
SHORT
�he code(e.g. 0000) can be changed.
CHANGE PIN
. Press
HS SETTINGS
LANGUAGE
.
OK
is activated the alarm will go off again approx. 7 minutes later. �urn the alarm
. Press
BS SETTINGS
.
OK
.
OK
=New Zealand.
=�rance/Portugal.
=others incl. UK/AUS.
English
.
OK
. Press .
OK
will be shown in standby mode. When the alarm goes
L
=internal/external.
INT/EXT
.
OK
TONE

down for a few seconds. �he volume is
.