CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
3.4
Front Cover
(1) Open the front cover.
(2) Remove the four M3x8 Taptite screws from the main cover.
Main cover
(3) Position the front cover at the angle of 45 degrees and release the bosses at the right and
left hand sides and the link at the left hand side.
(4) Remove the front cover.
Link
Step (3)
(boss)
Front cover
Taptite, bind M3x8
Fig. 4-14
Fig. 4-15
4-10
Taptite, bind M3x8
Front cover
°
45
(boss)
Front cover