Brother HL 1240 - B/W Laser Printer Service Manual page 96

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
(6) Turn the main frame upside down.
(7) Remove the two M3x6 Taptite screws and release the solenoid harness from the hook and
remove the cassette guide L/F.
Step (7)
Taptite, cup M3x6
(8) Remove the M3x4 screw and the tape on the solenoid harness and remove the solenoid
ASSY.
!
CAUTION:
When removing the solenoid, the solenoid rod and spring may come off. Be careful not to
loose them. (Refer to the figure above.)
Fig. 4-56
Tape
Main frame
Fig. 4-57
4-32
Cassette guide L/F
Spring
Rod
Solenoid ASSY
Screw, bind M3x4