Brother HL 1240 - B/W Laser Printer Service Manual page 74

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
(5) Turn the top cover upside down and remove the second eject roller ASSY by lifting the
middle of the roller upwards until the roller releases from the cover.
3.6 Main Cover
(1) Remove the two M3x8 Taptite screws from the rear of the main cover.
(2) Release the hooks at the right and left hand top sides of the printer, then, while pulling the
cover outwards to clear the power socket and switch, lift up the main cover to remove it
complete with the rear cover.
Step (1)
Taptite, bind M3x8
(hook)
Taptite, bind M3x8
Fig. 4-18
Rear cover
Main cover
Fig. 4-19
4-12
Second eject roller ASSY
Top cover
(hook)