Paper Cassette - Brother HL 1240 - B/W Laser Printer Service Manual

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
(5) Keeping the paper cassette upside down, release the pressure roller holder assembly
from the cassette by releasing the metal mounting plate from the plastic retaining boss.
Use a flat screwdriver to press the metal plate forwards until it clears the boss and then
remove the pressure roller holder assembly downwards from the cassette.
(6) Remove the cassette pressure roller from the assembly, then remove the pressure roller
shaft from the pressure roller.
(7) Remove the sponge holder ASSY from the holder. The two sponge holder springs will
also come off.
Pressure roller shaft
Sponge holder ASSY
Sponge holder springs

Paper cassette

Flat screwdriver
(8) Keeping the paper cassette upside down, remove the two M2.6x5 Taptite screws.
(9) Unhook the catches of each side guide, then press the lock lever towards the front of the
cassette to release the pressure plate.
Taptite, cup M2.6x5
Step (9)
(catches)
Pressure roller holder
Side guide L
Side guide rack
Cassette pressure roller
Fig. 4-7
Side guide L
Fig. 4-8
4-6
Pressure roller holder
Taptite, cup M2.6x5
Side guide rack
Paper cassette
(Back side)
Lock lever