Locating A Device - HP ProCurve 2510 Management And Configuration Manual

Syntax: chassislocate [ blink | on | off ]
ProCurve(config)# chassislocate
blink <1-1440>
off
on <1-1440>
ProCurve(config)# chassislocate
Figure B-24. The chassislocate command

Locating a Device

If you are trying to locate a particular switch you can enter the chassislocate
command. The blue Locator LED will light up on that switch.
Locate a device by using the blue Locate LED on the front panel.
blink <1-1440>
Blinks the chassis Locate LED for a selected number of minutes
(default is 30 minutes).
on <1-1440>
Turns the chassis Locate LED on for a selected number of minutes
(default is 30 minutes).
off
Turns the chassis Locate LED off.
Blink the chassis locate led (default 30 minutes).
Turn the chassis locate led off.
Turn the chassis locate led on (default 30 minutes).
Monitoring and Analyzing Switch Operation
Locating a Device
B-29